LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Maxima SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Steering Control System) >> DTC/Circuit Diagnosis >> DTC C1607, C1608: Power Steering Control Module >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO STEP 2  .

  2. DTC REPRODUCTION PROCEDURE

    CONSULT 

    1. Turn the ignition switch OFF to ON.
    2. Perform "Self Diagnostic Result" mode of "EPS".

    Is DTC "C1607" or "C1608" detected?

    YES 

    Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.

scientia non olet · About LEMON Manuals