Component Function Check

1. Select DOOR LOCK of BCM using CONSULT.
2. Select DOOR SW-DR, DOOR SW-AS, DOOR SW-RR, DOOR SW-RL, BACK DOOR SW in DATA MONITOR mode.
3. Check that the function operates normally according to the following conditions.

   Monitor item	Condition		Status
   DOOR SW-DR	Front door switch LH	Open	On
   		Closed	Off
   DOOR SW-AS	Front door switch RH	Open	On
   		Closed	Off
   DOOR SW-RR	Sliding door switch RH	Open	On
   		Closed	Off
   DOOR SW-RL	Sliding door switch LH	Open	On
   		Closed	Off
   BACK DOOR SW	Back door switch	Open	On
   		Closed	Off

Is the inspection result normal?

YES 

Door switch is OK.

NO 

Refer to DIAGNOSIS PROCEDURE .