DTC Detection Logic

NOTE:

If DTC B261A is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
If DTC B261A is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B261A	PUSH-BTN IGN SW	BCM detects the mismatch between the following for 1 second or more Push-button ignition switch operation condition judged by push switch signal Push-button ignition switch status signal from IPDM E/R (CAN)	Harness or connectors (Push-button ignition switch circuit is open or shorted) IPDM E/R BCM