Operation Flow - Off Status

In this status the AUTO ACC function stops and power to the accessories is not supplied.

No.	Function status	Shifting condition	AUTO ACC power source
	Shifting from "OFF status" to "Ignition Switch ON Status" Shifting from "AUTO ACC Use Impossible Status" to "Ignition Switch ON Status" Shifting from "AUTO ACC Use Intention (Confirmation) Check Status" to "Ignition switch Ignition Switch ON Status"	Turn the ignition switch from OFF to ON.	OFF → ON
	Shifting from "OFF status" to "AUTO ACC Use Possible (Available) Status" Shifting from "AUTO ACC Use Impossible Status" to "AUTO ACC Use Possible (Available) Status"	Models with Intelligent Key: Operate either the door request switch or the unlock button of the Intelligent Key to unlock the door. Models without Intelligent Key: Operate the unlock button of remote controller button to unlock the door.	OFF → ON
	Shifting from "Ignition Switch ON Status" to "AUTO ACC Use Possible (Available) Status"	Turn the ignition switch from ON to OFF while driver door is closed.	ON
	Shifting from "AUTO ACC Use Possible (Available) Status" to "Ignition Switch ON Status"	Turn the ignition switch from OFF to ON.	ON
	"AUTO ACC Use Possible (Available) Status" Time extension (10 minutes)	Operate audio or navigation.	ON
	Shifting from "Ignition Switch ON Status" to "AUTO ACC Use Intention (Confirmation) Check Status"	Turn the ignition switch from ON to OFF while driver door is open. BCM enters Shorting Pin Mode.	ON
	Shifting from "AUTO ACC Use Possible (Available) Status" to "AUTO ACC Use Intention (Confirmation) Check Status"	For models with Intelligent Key, any of the following conditions is satisfied. Close all doors, and lock all doors with the Intelligent Key or door request switch. Ten minutes pass from "AUTO ACC Use Possible (Available) Status." Open driver door. BCM enters Shorting Pin Mode. For models without Intelligent Key, any of the following conditions is satisfied. Close all doors, and lock all doors with the remote controller button. Remove the key from the ignition key cylinder. Ten minutes pass from "AUTO ACC Use Possible (Available) Status." Driver door is opened. BCM enters Shorting Pin Mode.	ON
	Shifting from "AUTO ACC Use Intention (Confirmation) Check Status" to "AUTO ACC Use Possible (Available) Status"	Any of the following conditions is satisfied. Models with Intelligent Key: Operate either the door request switch, door key cylinder or the unlock button of the Intelligent Key to unlock the door. Models without Intelligent Key: Operate the unlock button of remote controller or door key cylinder to unlock the door. Operate audio or navigation power switch	ON
	Shifting from "AUTO ACC Use Possible (Available) Status" to "AUTO ACC Use Impossible Status"	Thirty minutes pass from "AUTO ACC Use Possible (Available) Status."	ON
	Shifting from "AUTO ACC Use Intention (Confirmation) Check Status" to "AUTO ACC Use Impossible Status"	Any of the following conditions is satisfied. Two minutes pass from "AUTO ACC Use Intention (Confirmation) Check Status." In "AUTO ACC Use Intention (Confirmation) Check Status," 30 minutes pass after "AUTO ACC Use Possible (Available) Status" is satisfied.	ON
	Shifting from "AUTO ACC Use Impossible Status" to "OFF status"	One minute passes from "AUTO ACC Use Impossible Status."	ON → OFF
	Shifting from "OFF status" to "AUTO ACC Use Impossible Status"	Any of the following conditions is satisfied. Driver door is opened or closed. The steering lock operates.	OFF → ON
	"AUTO ACC Use Impossible Status" time extension (1 minute)	Any of the following conditions is satisfied. Driver door is opened or closed. The steering lock operates.	ON