| OUTSIDE BUZZER |
This test is able to check Intelligent Key warning buzzer operation [On/Off]. |
| INSIDE BUZZER |
This test is able to check combination meter warning chime operation [Take Out/Knob/Key/Off]. |
| INDICATOR |
This test is able to check combination meter warning lamp operation [KEY ON/KEY IND/Off]. |
| FLASHER |
This test is able to check flasher operation [On/Off]. |
| HORN |
This test is able to check horn operation [On/Off]. |
| IGN CONT2 |
This test is able to check ignition relay-2 control operation [On/Off]. |
| ENGINE SW ILLUMI |
This test is able to check push-button ignition switch START indicator operation [On/Off]. |
| ENGINE START REQUEST |
This test is able to check BCM starter request switch signal to IPDM E/R via CAN communication [MODE 1/MODE 2/MODE 3/OFF]. |
| IGNITION RELAY |
This test is able to check ignition relay operation [On/Off]. |
| STARTER CUT RELAY |
This test is able to check the starter control relay [On/Off]. |
| AUTO ACC 2 |
This test is able to check BCM sends power supply to audio unit or NAVI control unit [On/Off]. |
| AUTOMATIC BACK DOOR |
This test is able to check automatic back door operation [On/Off]. |
| AUTO ACC 1 |
This test is able to check BCM sends power supply to ACC relay [MODE 1/MODE 2/MODE 3/OFF]. |
| TRUNK LUGGAGE LAMP TEST |
This test is able to check luggage room lamp test operation [On/Off]. |