| BCM |
Verifies the received signal from the ignition key ID, then informs ECM whether to allow engine start. |
| Transmission range switch (CVT models) |
Detects whether the shift lever is in park. |
| Clutch interlock switch (M/T models) |
Detects whether the clutch pedal is depressed. |
| Dongle unit (Canada only) |
Sends ID verification signal to the BCM. |
| Starter relay |
Supplies battery voltage to the starter motor when enabled. |
| NATS antenna amp. |
Detects the ignition key presence in the ignition key cylinder. |
| Security indicator |
Indicates the status of the security system. |
| EPDM E/R |
Supplies battery voltage from integrated starter control relay to the starter motor. |