LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Sentra FE+S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System (Without Intelligent Key System) >> Removal And Installation >> BCM (Body Control Module) >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

  1. Disconnect the negative battery terminal. Refer to REMOVAL AND INSTALLATION (BATTERY) .
  2. Remove instrument lower panel LH and instrument side finisher LH. Refer to REMOVAL AND INSTALLATION .
  3. Remove fuse block (J/B) screws (A) and position (BCM) aside.
    Fig 1: Fuse Block Screws
    G08991638Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove harness clip (A).
    Fig 2: Harness Clip
    G08991639Courtesy of NISSAN NORTH AMERICA, INC.
  5. Remove the screws (A) from the BCM (1).
    Fig 3: BCM And Screws
    G08991640Courtesy of NISSAN NORTH AMERICA, INC.
  6. Disconnect the harness connectors and remove the BCM.
scientia non olet · About LEMON Manuals