Detailed Flow
- INTERVIEW FOR MALFUNCTION
It is important to clarify the customer's concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:The customers are not professionals. Never assume that "maybe the customer means..." or "maybe the customer mentioned this symptom".
GO TO STEP 2.
- SELF DIAGNOSTIC RESULT WITH CONSULT
CONSULT
- Select "Self Diagnostic Result" mode of "LASER/RADAR".
- Check if the DTC is detected in the "Self Diagnostic Result" mode of "LASER/RADAR".
Is any DTC detected?
YES
GO TO STEP 5.
NO
GO TO STEP 3.
- ACTION TEST
Perform the FEB system action test to check the system operation. Check if any other malfunctions occur.
GO TO STEP 4.
- SYMPTOM DIAGNOSIS
Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to SYMPTOM TABLE .
GO TO STEP 6.
- TROUBLE DIAGNOSIS BY DTC
- Check the DTC in the "Self Diagnostic Result".
- Perform trouble diagnosis for the detected DTC. Refer to DTC INDEX .
GO TO STEP 6.
- MALFUNCTIONING PART REPAIR
Repair or replace the identified malfunctioning parts.
GO TO STEP 7.
- REPAIR CHECK (SELF DIAGNOSTIC RESULT WITH CONSULT)
- Erase "Self Diagnostic Result".
- Select "Self Diagnostic Result" again after repairing or replacing the specific items.
- Check if any DTC is detected in "Self Diagnostic Result" mode of "LASER/RADAR".
Is any DTC detected?
YES
GO TO STEP 5
NO
GO TO STEP 8.
- REPAIR CHECK (ACTION TEST)
Perform the FEB system action test. Check that the malfunction symptom is solved or no other symptoms occur.
Is there a malfunction symptom?
YES
GO TO STEP 4
NO
Inspection End.