Detailed Flow
- INTERVIEW FOR MALFUNCTION
It is important to clarify the customer's concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:The customers are not professionals. Never assume that "maybe the customer means..." or "maybe the customer mentioned this symptom".
GO TO STEP 2.
- SELF - DIAGNOSIS WITH CONSULT
CONSULT
- Perform "All DTC Reading" mode.
- Check if the DTC is detected in the "Self Diagnostic Result" of the following:
- "ICC/ADAS"
- "LASER/RADAR"
- "SIDE RADAR LEFT"
- "SIDE RADAR RIGHT"
Is any DTC detected?
YES
GO TO STEP 5.
NO
GO TO STEP 3.
- ACTION TEST
- Perform the system action test to check the operation status of the following:
- BSW: Refer to DESCRIPTION .
- RCTA: Refer to DESCRIPTION .
- Check if any other malfunctions occur.
GO TO STEP 4.
- Perform the system action test to check the operation status of the following:
- SYMPTOM DIAGNOSIS
Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to SYMPTOM TABLE .
GO TO STEP 6.
- TROUBLE DIAGNOSIS BY DTC
CONSULT
- Check the DTC in the "Self Diagnostic Result".
- Perform trouble diagnosis for the following detected DTC:
NOTE:If "DTC U1000" is detected, first diagnose the CAN communication system or ITS communication system.
GO TO STEP 6.
- MALFUNCTIONING PART REPAIR
Repair or replace the identified malfunctioning parts.
GO TO STEP 7.
- REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)
- Erase "Self Diagnostic Result".
- Perform "All DTC Reading" mode after repairing or replacing the specific items.
- Check if any DTC is detected in self-diagnosis results of the following:
- "ICC/ADAS"
- "LASER/RADAR"
- "SIDE RADAR LEFT"
- "SIDE RADAR RIGHT"
Is any DTC detected?
YES
GO TO STEP 5 .
NO
GO TO STEP 8.
- REPAIR CHECK (ACTION TEST)
Perform the following system action test. Check that the malfunction symptom is solved or no other symptoms occur.
- BSW: Refer to DESCRIPTION .
- RCTA: Refer to DESCRIPTION .
Is there a malfunction symptom?
YES
GO TO STEP 4 .
NO
Inspection End.