Diagnostic Test
- CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION
With CONSULT
- Turn ignition switch ON.
- Select "DATA MONITOR" mode of "ENGINE" using CONSULT.
- Select "LOAD SIGNAL" and check indication as per the following conditions.
Monitor item Condition Indication LOAD SIGNAL Rear window defogger switch ON ON OFF OFF
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Proceed to DIAGNOSIS PROCEDURE .
- CHECK LIGHTING SWITCH FUNCTION
Check "LOAD SIGNAL" indication as per the following conditions.
Monitor item Condition Indication LOAD SIGNAL Lighting switch ON at 2nd position ON OFF OFF Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Proceed to DIAGNOSIS PROCEDURE .
- CHECK HEATER FAN CONTROL SWITCH FUNCTION
Select "HEATER FAN SW" and check indication as per the following conditions.
Monitor item Condition Indication HEATER FAN SW Heater fan control switch ON ON OFF OFF Is the inspection result normal?
YES
INSPECTION END
NO
Proceed to DIAGNOSIS PROCEDURE .