DTC Detection Logic

NOTE:

If DTC P0014 is displayed with DTC P0078, first perform trouble diagnosis for DTC P0078. Refer to DTC LOGIC .

If DTC P0014 is displayed with P1078, first perform trouble diagnosis for P1078. Refer to DTC LOGIC .

DTC No.	CONSULT screen terms (Trouble diagnosis content)	DTC detecting condition	Possible cause
P0014	EXH/V TIM CONT-B1 ('B' Camshaft position - timing over-advanced or system performance bank 1)	There is a gap between angle of target and phase-control angle degree.	Crankshaft position sensor (POS) Camshaft position sensor (PHASE) Exhaust valve timing control position sensor Exhaust valve control solenoid valve Accumulation of debris to the signal pick-up portion of the camshaft Timing chain installation Foreign matter caught in the oil groove for exhaust valve timing control