LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Sentra FE+S >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (DTCS) (2 Of 3) >> DTC/Circuit Diagnosis >> DTC P0335: CKP Sensor (Pos) >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

NOTE:

If DTC P0340 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to DTC LOGIC .

DTC No. CONSULT screen terms
(Trouble diagnosis content)		 DTC detecting condition Possible cause
P0335 CKP SEN/CIRCUIT
(Crankshaft position sensor "A" circuit)
  • The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
  • The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
  • The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
  • Harness or connectors

    [Crankshaft position sensor (POS) circuit is open or shorted.]

  • Crankshaft position sensor (POS)
  • Signal plate
scientia non olet · About LEMON Manuals