LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Sentra FE+S >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (DTCS) (2 Of 3) >> DTC/Circuit Diagnosis >> DTC P0340: CMP Sensor (Phase) >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

DTC No. CONSULT screen terms
(Trouble diagnosis content)		 DTC detecting condition Possible cause
P0340 CMP SEN/CIRC-B1
(Camshaft position sensor "A" circuit bank 1)
  • The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
  • The cylinder No. signal is not sent to ECM during engine running.
  • The cylinder No. signal is not in the normal pattern during engine running.
  • Harness or connectors

    (Camshaft position sensor circuit is open or shorted)

  • Camshaft position sensor
  • Camshaft (Intake)
  • Starter motor
  • Starting system circuit
  • Dead (Weak) battery
  • Sensor power supply 2 circuit
scientia non olet · About LEMON Manuals