| Outer socket |
Rocking torque |
0.3 - 2.9 N•m (0.03 - 0.29 kg-m, 3.0 - 25 in-lb) |
- Measurement on spring balance
- Measuring point: cotter pin hole of stud
|
6.0 - 58 N (0.61 - 5.9 kg, 1.3 - 13 lb) |
| Rotating torque |
0.3 - 2.0 N•m (0.03 - 0.2 kg-m, 3.0 - 18 in-lb) |
| Axial end play |
0.4 mm (0.020 in) or less |
| Inner socket |
Rocking torque |
0.5 - 5.0 N•m (0.05 - 0.51 kg-m, 4.4 - 44 in-lb) |
- Measurement on spring balance
- Measuring point at * mark shown
|
4.3 - 43.1 N (0.44 - 4.40 kg, 0.97 - 9.69 lb) |
| Axial end play |
0.2 mm (0.008 in) or less |
| Inner socket length (L) |
197 mm (7.8 in) or less |
| |
 Courtesy of NISSAN NORTH AMERICA, INC.
|
|