LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Sentra FE+S >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Security Control System (With Intelligent Key System) (DTCS)) >> DTC/Circuit Diagnosis >> DTC B2110: Shift Position/Clutch Interlock Switch >> Diagnosis Procedure (M/T Models)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure (M/T Models)

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

  1. CHECK DTC OF BCM

    Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.

    Is DTC detected?

    YES 

    Perform the trouble diagnosis related to the detected DTC. Refer to DTC INDEX .

    NO 

    GO TO STEP 2  .

  2. CHECK CLUTCH INTERLOCK SWITCH SIGNAL CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect clutch interlock switch connector.
    3. Disconnect IPDM E/R connector.
    4. Check continuity between clutch interlock switch harness connector and IPDM E/R harness connector.
      Clutch interlock switch IPDM E/R Continuity
      Connector Terminal Connector Terminal
      E34 2 E43 4 Yes
    5. Check continuity between clutch interlock switch harness connector and ground.
      Clutch interlock switch Ground Continuity
      Connector Terminal
      E34 2 No

    Is the inspection result normal?

    YES 

    Replace IPDM E/R. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

scientia non olet · About LEMON Manuals