DTC Confirmation Procedure
WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE 1
- Turn ignition switch ON.
- Wait 2 seconds or more under the following conditions.
- Shift lever: In the neutral position.
- Clutch pedal: Depressed
- Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
GO TO STEP 2 .
- PERFORM DTC CONFIRMATION PROCEDURE 2
- Release clutch pedal and wait 2 seconds or more.
- Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
Inspection End