LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Sentra FE+S >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Security Control System (With Intelligent Key System) (DTCS)) >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK ENGINE START FUNCTION

    1. Check that DTC except for DTC P1610 is not detected.

      If detected, erase the DTC after fixing.

    2. Turn ignition switch OFF.
    3. Depress brake pedal and contact the registered Intelligent Key backside to push-button ignition switch, then wait 5 seconds.
    4. Turn ignition switch ON.
    5. Turn ignition switch OFF and wait 5 seconds.
    6. Repeat steps 3 and 5 twice (a total of 3 times).
    7. Check that engine can start.

    Inspection End.

scientia non olet · About LEMON Manuals