Brake Actuator
WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The test can be performed only when the engine is running.
| Test item | Operation | Description | "PRESS ORDER" value |
|---|---|---|---|
| BRAKE ACTUATOR 1 | Off | Stops transmitting the brake fluid pressure control signal to end the test. | - |
| On | Starts transmitting the brake fluid pressure control signal to start the test. | 10 bar | |
| BRAKE ACTUATOR 2 | Off | Stops transmitting the brake fluid pressure control signal to end the test. | - |
| On | Starts transmitting the brake fluid pressure control signal to start the test. | 20 bar | |
| BRAKE ACTUATOR 3 | Off | Stops transmitting the brake fluid pressure control signal to end the test. | - |
| On | Starts transmitting the brake fluid pressure control signal to start the test. | 30 bar |
NOTE:
The test is finished 10 seconds after starting.