LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Sentra S, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Power Control System (Power Distribution System)) >> Symptom Diagnosis >> Push-Button Ignition Switch Does Not Operate >> Diagnosis Procedure >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM WORK SUPPORT

    Perform "INSIDE ANT DIAGNOSIS" on Work Support of "INTELLIGENT KEY".

    Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .

    GO TO STEP 2  .

  2. PERFORM SELF-DIAGNOSIS RESULT

    Perform Self-Diagnosis Result of "BCM".

    Is DTC detected?

    YES 

    Refer to DTC INDEX .

    NO 

    GO TO STEP 3  .

  3. CHECK PUSH-BUTTON IGNITION SWITCH

    Check push-button ignition switch.

    Refer to COMPONENT FUNCTION CHECK .

    Is the operation normal?

    YES 

    GO TO STEP 4  .

    NO 

    Repair or replace malfunctioning parts.

  4. CONFIRM THE OPERATION

    Confirm the operation again.

    Is the inspection normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    GO TO STEP 1  .