Data Monitor

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Monitor Item [Unit]	Main Signals	Description
MOTOR FAN REQ [%]	*	Indicates cooling fan speed signal received from ECM on CAN communication line
AC COMP REQ [On/Off]	*	Indicates A/C compressor request signal received from ECM on CAN communication line
TAIL&CLR REQ [On/Off]	*	Indicates position light request signal received from BCM on CAN communication line
HL LO REQ [On/Off]	*	Indicates low beam request signal received from BCM on CAN communication line
HL HI REQ [On/Off]	*	Indicates high beam request signal received from BCM on CAN communication line
FR FOG REQ [On/Off]	*	Indicates front fog light request signal received from BCM on CAN communication line
FR WIP REQ [Stop/1LOW/Low/Hi]	*	Indicates front wiper request signal received from BCM on CAN communication line
WIP AUTO STOP [STOP P/ACT P]	*	Indicates condition of front wiper auto stop signal
WIP PROT [Off/BLOCK]	*	Indicates condition of front wiper fail-safe operation
IGN RLY1 - REQ [On/Off]		Indicates ignition switch ON signal received from BCM on CAN communication line
IGN RLY [On/Off]	*	Indicates condition of ignition relay
INTER/NP SW [On/Off]		Indicates condition of CVT shift position
ST RLY CONT [On/Off]		Indicates starter relay status signal received from BCM on CAN communication line
IHBT RLY - REQ [On/Off]		Indicates starter control relay signal received from BCM on CAN communication line
ST/INHI RLY [Off/ ST /INHI]		Indicates condition of starter relay and starter control relay
DETENT SW [On/Off]		Indicates condition of CVT shift selector (park position switch)
DTRL REQ [Off]		Indicates daytime running light request signal received from BCM on CAN communication line
THFT HRN REQ [On/Off]		Indicates theft warning horn request signal received from BCM on CAN communication line
HORN CHIRP [On/Off]		Indicates horn reminder signal received from BCM on CAN communication line