Symptom Table
WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Perform the data monitor of CONSULT to check for any malfunctioning item.
- Check the malfunction combinations.
Malfunction item:
Malfunction combination Data monitor item FR WIPER HI FR WIPER LOW FR WASHER SW FR WIPER INT TURN SIGNAL R TURN SIGNAL L TAIL LAMP SW HI BEAM SW HEAD LAMP SW 1 HEAD LAMP SW 2 PASSING SW AUTO LIGHT SW A * * * * B * * * * C * * D * * E F * G * H * * * I * * * J * * * * K All Items L If only one item is detected or the item is not applicable to the combinations A to K - Identify the malfunctioning part from the agreed combination and repair or replace the part.
Malfunction combination Malfunctioning part Repair or replace A Combination switch INPUT 1 circuit Inspect the combination switch input circuit applicable to the malfunctioning part. Refer to DIAGNOSIS PROCEDURE . B Combination switch INPUT 2 circuit C Combination switch INPUT 3 circuit D Combination switch INPUT 4 circuit E Combination switch INPUT 5 circuit F Combination switch OUTPUT 1 circuit Inspect the combination switch output circuit applicable to the malfunctioning part. Refer to DIAGNOSIS PROCEDURE . G Combination switch OUTPUT 2 circuit H Combination switch OUTPUT 3 circuit I Combination switch OUTPUT 4 circuit J Combination switch OUTPUT 5 circuit K BCM Replace BCM. Refer to REMOVAL AND INSTALLATION . L Combination switch Replace the combination switch.