Front Power Window Motor RH Circuit Check

1. Turn ignition switch OFF.
2. Disconnect front power window motor RH.
3. Turn ignition switch ON.
4. Check voltage between front power window motor RH connector D105 and ground.

   Terminal			Front power window motor RH condition	Voltage (V) (Approx.)
   (+)		(-)
   Front power window motor RH connector	Terminal
   D105	3	Ground	UP	Battery voltage
   			DOWN	0
   	1		UP	0
   			DOWN	Battery voltage

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

GO TO STEP 2  .

1. Turn ignition switch OFF.
2. Disconnect power window and door lock/unlock switch RH.
3. Check continuity between power window and door lock/unlock switch RH connector D104 and front power window motor RH connector D105.

   Power window and door lock/unlock switch RH connector	Terminal	Front power window motor RH connector	Terminal	Continuity
   D104	6	D105	1	Yes
   	7		3

4. Check continuity between power window and door lock/unlock switch connector D104 and ground.

   Power window and door lock/unlock switch RH connector	Terminal	Ground	Continuity
   D104	6		No
   	7

Is the inspection result normal?

YES 

Replace power window and door lock/unlock switch RH. Refer to REMOVAL AND INSTALLATION .

NO 

Repair or replace the harness or connectors.

Check front power window motor RH.

Refer to COMPONENT INSPECTION .

Is the inspection result normal?

YES 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .

NO 

Replace front power window motor RH. Refer to REMOVAL AND INSTALLATION .