ADAS Control Unit Input/Output Signal Item
WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
ADAS control unit receives signals via CAN communication. It also detects vehicle conditions that are necessary for Blind Spot Warning control.
INPUT SIGNAL ITEM
| Transmit unit | Signal name | Description | ||
|---|---|---|---|---|
| TCM | CAN communication | Shift position signal | Receives a selector lever position. | |
| ABS actuator and electric unit (control unit) | CAN communication | Vehicle speed signal (ABS) | Receives wheel speeds of four wheels. | |
| BCM | CAN communication | Turn indicator signal | Receives an operational state of the turn signal lamp and the hazard lamp. | |
| Dimmer signal | Receives ON/OFF state of dimmer signal. | |||
| Combination meter | CAN communication | System selection signal | Receives a selection state of each item in "Driver Aids" selected with the integral switch. | |
| Side radar LH, RH | ITS communication | Vehicle detection signal | Receives vehicle detection condition of detection zone. | |
OUTPUT SIGNAL ITEM
| Reception unit | Signal name | Description | ||
|---|---|---|---|---|
| Combination meter | CAN communication | BSW indicator signal | Transmits a BSW indicator signal to turn ON the BSW indicator on the combination meter. | |
| Side radar LH, RH | ITS communication | Blind Spot Warning indicator signal | Transmits a Blind Spot Warning indicator signal to turn ON the Blind Spot Warning indicator. | |
| Blind Spot Warning indicator dimmer signal | Transmits a Blind Spot Warning indicator dimmer signal to dim Blind Spot Warning indicator. | |||
| Vehicle speed signal | Transmits a vehicle speed that is calculated by the ADAS control unit. | |||
| Warning buzzer | Warning buzzer signal | Activates warning buzzer. | ||