DTC Detection Logic

NOTE:

If DTC B210B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .

CONSULT Display	DTC Detection Condition	Possible Cause
START CONT RLY ON [B210B]	When comparing the following items, IPDM E/R detects that starter control relay is stuck in the ON position for 1 second or more: Starter control relay signal (CAN) from BCM. Starter relay status signal (CAN) from BCM. Starter control relay and starter relay status signal. (IPDM E/R input) Starter control relay control signal. (IPDM E/R output) Transmission range switch signal input.	IPDM E/R