Component Inspection [CVT Shift Selector (Park Position Switch)]

1. Turn ignition switch OFF.
2. Disconnect CVT shift selector connector.
3. Check continuity between CVT shift selector (park position switch) terminals.

   CVT shift selector (detention switch)		Condition		Continuity
   Terminal
   7	8	Selector lever: P position	Selector button: Released	No
   			Selector button: Pressed	Yes
   		Selector lever: Other than P position

Is the inspection result normal?

YES 

Inspection End.

NO 

Replace CVT shift selector. Refer to REMOVAL AND INSTALLATION .