Diagnostic Test
- CHECK COOLING FAN FUNCTION
With CONSULT
- Turn ignition switch ON.
- Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT.
- Touch "LOW" and "Hi" on the CONSULT screen.
- Check that cooling fan operates.
NOTE:The cooling fan operates at high speeds even when "LOW" is selected in CONSULT "ACTIVE TEST". (For single connector cooling fan with M/T models)
Without CONSULT
- Perform IPDM E/R auto active test and check cooling fan motor operation. Refer to DIAGNOSIS DESCRIPTION .
- Check that cooling fan operates.
Is the inspection result normal?
YES
INSPECTION END
NO
Refer to DIAGNOSIS PROCEDURE .