Wake-Up Operation

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

BCM transmits the sleep wake up signal (wake up) to each unit when any of the CAN wake-up conditions are fulfilled. It changes from the low power consumption mode or the CAN communication sleep mode to the normal mode.
Each unit starts the transmission of CAN communication with the sleep wake up signal. In addition, the combination meter transmits the wake up signal to BCM via CAN communication to report the CAN communication start.

BCM wake-up condition	CAN wake-up condition
Front door lock key cylinder switch LH: Lock or unlock Door lock switch: OFF→ON Door unlock switch: OFF→ON Trunk lid opener switch: OFF→ON Remote keyless entry receiver: Receiving valid keyfob	Receiving the sleep-ready signal (Not-ready) from any units Push-button ignition switch (push switch): OFF→ON Hazard switch: OFF→ON PASSING switch: OFF→ON, ON→OFF TAIL LAMP switch: OFF→ON Front door switch LH: OFF→ON, ON→OFF Front door switch RH: OFF → ON, ON → OFF Trunk lid switch: OFF→ON, ON→OFF Front outside handle LH request switch: OFF→ON Front outside handle RH request switch: OFF→ON Stop lamp switch signal: ON Remote keyless entry receiver: Receiving valid keyfob

BCM wake-up condition

CAN wake-up condition

Front door lock key cylinder switch LH: Lock or unlock
Door lock switch: OFF→ON
Door unlock switch: OFF→ON
Trunk lid opener switch: OFF→ON
Remote keyless entry receiver: Receiving valid keyfob

Receiving the sleep-ready signal (Not-ready) from any units
Push-button ignition switch (push switch): OFF→ON
Hazard switch: OFF→ON
PASSING switch: OFF→ON, ON→OFF
TAIL LAMP switch: OFF→ON
Front door switch LH: OFF→ON, ON→OFF
Front door switch RH: OFF → ON, ON → OFF
Trunk lid switch: OFF→ON, ON→OFF
Front outside handle LH request switch: OFF→ON
Front outside handle RH request switch: OFF→ON
Stop lamp switch signal: ON
Remote keyless entry receiver: Receiving valid keyfob