Disassembly And Assembly: Disassembly

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Before disassembly, note the proper placement of the wires to the correct terminals and correct wire routing to the terminals.

Disconnect the red, white, and double black wire connectors.
- Press the tabs on the terminals to release the locking tabs.
  
  Fig 1: Red, White And Double Black Wire Connectors
  Courtesy of NISSAN NORTH AMERICA, INC.
Release the two clips and remove the fuel temperature sensor from the pump assembly.

Fig 2: Removing Fuel Temperature Sensor From Pump Assembly
Courtesy of NISSAN NORTH AMERICA, INC.
Release the tab (A) and slide the level sending unit module and float arm assembly up (B) to remove.

Fig 3: Removing Fuel Level Sensor Unit And Float Arm Assembly
Courtesy of NISSAN NORTH AMERICA, INC.