| P0335 |
Crankshaft position sensor (POS) circuit |
- The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
- The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
- The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
|
- Harness or connectors
[CKP sensor (POS) circuit is open or shorted.]
(APP sensor 2 circuit is shorted.)
(EVAP control system pressure sensor circuit is shorted.)
(Refrigerant pressure sensor circuit is shorted.)
(Brake booster pressure sensor circuit is shorted)
(Gear lever position sensor circuit is shorted)
- Crankshaft position sensor (POS)
- Accelerator pedal position sensor
- EVAP control system pressure sensor
- Refrigerant pressure sensor
- Brake booster pressure sensor.
- Gear lever position sensor
- Signal plate
|