LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Audio, Visual & Navigation System (Around View Monitor System)) >> DTC/Circuit Diagnosis >> DTC U0428: Steering Angle Sensor >> DTC Description >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK DTC PRIORITY

    If DTC U0428 is displayed with DTC U1232, first perform the confirmation procedure (trouble diagnosis) for DTC U1232.

    Is applicable DTC detected?

    YES 

    Perform diagnosis of applicable DTC. Refer to DTC DESCRIPTION .

    NO 

    GO TO STEP 2  .

  2. PERFORM DTC CONFIRMATION PROCEDURE

    G-20 CONSULT

    1. Turn ignition switch ON.
    2. Turn ignition switch OFF and wait at least 30 seconds.
    3. Turn ignition switch ON and wait at least 30 seconds or more.
    4. Select "Self Diagnostic Result" mode of "AVM" using.
    5. Check DTC.

    Is DTC U0428 detected?

    YES 

    Proceed to DIAGNOSIS PROCEDURE .

    NO-1 

    To check malfunction symptom before repair: INTERMITTENT INCIDENT .

    NO-2 

    Confirmation after repair: Inspection End.

scientia non olet · About LEMON Manuals