LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Audio, Visual & Navigation System (Around View Monitor System)) >> DTC/Circuit Diagnosis >> Power Supply And Ground Circuit >> Around View Monitor Control Unit >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUSE

    1. Turn ignition switch OFF.
    2. Check that the following fuse is not blown:
      Power Source Fuse No. Capacity
      Battery 7 10 A
      Ignition switch ON 14 10 A

    Is the fuse blown?

    YES 

    Replace the blown fuse after repairing the affected circuit.

    NO 

    GO TO STEP 2  .

  2. CHECK POWER SUPPLY CIRCUITS

    Check voltage between around view monitor control unit harness connector M161 and M162 and ground.

    Signal Name (+) (-) Ignition Switch Position Reference Value
    (Approx.)
    Around View Monitor Control Unit
    Connector Terminal
    Battery power supply M161 7 Ground OFF Battery voltage
    Ignition signal M162 26 ON

    Is inspection result normal?

    YES 

    GO TO STEP 3  .

    NO 

    Check harness between around view monitor control unit and fuse.

  3. CHECK GROUND CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect around view monitor control unit connector M96.
    3. Check continuity between around view monitor control unit harness connector M96 and ground.
      (+) (-) Continuity
      Around View Monitor Control Unit
      Connector Terminal
      M96 39 Ground Yes

    Is inspection result normal?

    YES 

    Inspection End.

    NO 

    Repair harness or connector.

scientia non olet · About LEMON Manuals