LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Security Control System) >> DTC/Circuit Diagnosis >> Horn Function >> DIAGNOSISPROCEDURE
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Horn Function: DIAGNOSISPROCEDURE

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

  1. INSPECTION START

    Perform inspection in accordance with procedure that confirms malfunction.

    Which procedure confirms malfunction?

    Component Function Check 1 

    GO TO STEP 2  .

    Component Function Check 2 

    GO TO STEP 4  .

  2. CHECK HORN FUNCTION

    Check that horns function properly using horn switch.

    Do horns sound?

    YES 

    GO TO STEP 3  .

    NO 

    Check horn circuit. Refer to WIRING DIAGRAM .

  3. CHECK HORN CONTROL CIRCUIT

    1. Disconnect horn relay.
    2. Disconnect IPDM E/R connector.
    3. Check continuity between IPDM E/R harness connector and horn relay harness connector.
      IPDM E/R Horn Relay Continuity
      Connector Terminal Connector Terminal
      E119 22 H1 1 Yes
    4. Check continuity between IPDM E/R harness connector and ground.
      IPDM E/R Ground Continuity
      Connector Terminal
      E119 22 No

    Is the inspection result normal?

    YES 

    Replace IPDM E/R. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

  4. CHECK ANTI-THEFT HORN RELAY POWER SUPPLY

    1. Disconnect anti-theft horn relay.
    2. Check voltage between anti-theft horn relay harness connector and ground.
      (+) (-) Voltage (V)
      (Approx.)
      Anti-Theft Horn Relay
      Connector Terminal
      E8 2 Ground Battery Voltage

    Is the inspection result normal?

    YES 

    GO TO STEP 5  .

    NO-1 

    Check 10 A fuse [No. 59 located in the fuse and fusible link box].

    NO-2 

    Check harness for open or short between anti-theft horn relay and fuse.

  5. CHECK ANTI-THEFT HORN CONTROL CIRCUIT

    1. Disconnect IPDM E/R connector.
    2. Check continuity between IPDM E/R harness connector and anti-theft horn relay harness connector.
      IPDM E/R Anti Theft Horn Relay Continuity
      Connector Terminal Connector Terminal
      E119 23 E8 1 Yes
    3. Check continuity between IPDM E/R harness connector and ground.
      IPDM E/R Ground Continuity
      Connector Terminal
      E119 23 No

    Is the inspection result normal?

    YES 

    GO TO STEP 6  .

    NO 

    Repair or replace harness.

  6. CHECK ANTI-THEFT HORN CIRCUIT

    1. Check continuity between anti-theft horn relay harness connector and anti-theft horn harness connector.
      Anti-Theft Horn Relay Anti-Theft Horn Continuity
      Connector Terminal Connector Terminal
      E8 3 E220 1 Yes
    2. Check continuity between anti-theft horn relay harness connector and ground.
      Anti-Theft Horn Relay Ground Continuity
      Connector Terminal
      E8 3 No

    Is the inspection result normal?

    YES 

    GO TO STEP 7  .

    NO 

    Repair or replace harness.

  7. CHECK ANTI-THEFT HORN RELAY

    Refer to COMPONENT INSPECTION .

    Is the inspection result normal?

    YES 

    Replace anti-theft horn.

    NO 

    Replace anti-theft horn relay.

scientia non olet · About LEMON Manuals