Component Function Check
WARNING: This page is about a different car, the 2016 Infiniti QX70. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK EACH DOOR SWITCH SIGNAL BY CONSULT
CONSULT DATA MONITOR
- Turn ignition switch ON.
- Select "DOOR SW-DR", "DOOR SW-AS", "DOOR SW-RR" and "DOOR SW-RL" of TOTAL ILLUM C/U data monitor item.
- While operating each door switch, check the monitor status.
Monitor item Condition Monitor status DOOR-SW-DR Front door
(driver side)Open On Close Off DOOR-SW-AS Front door
(passenger side)Open On Close Off DOOR-SW-RR Rear door
(RH)Open On Close Off DOOR-SW-RL Rear door
(LH)Open On Close Off Is the item status normal?
YES
Each door switch circuit is normal.
NO
Refer to DIAGNOSIS PROCEDURE .