LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 522 (Interior Lighting System) >> Circuit Diagnosis >> Illumination Control Signal Circuit >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX70. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK ILLUMINATION CONTROL SIGNAL INPUT BY CONSULT

    G-20 CONSULT DATA MONITOR

    1. Turn ignition switch ON.
    2. Switch the lighting switch 1ST.
    3. Select "ILLUM CONT SIGNAL" of TOTAL ILLUM C/U data monitor item.
    4. While operating the illumination control switch, check the monitor status.
    Monitor item Condition Monitor status
    ILLUM CONT SIGNAL Brightness level Maximum 100 %
    Midway 50 %
    Minimum 0 %

    Is the item status normal?

    YES 

    Illumination control signal circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals