Component Function Check
WARNING: This page is about a different car, the 2016 Infiniti QX70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Check the tail lamp circuit if the tail lamp is not turned ON. Refer to COMPONENT FUNCTION CHECK .
- CHECK TAIL LAMP SIGNAL INPUT WITH CONSULT
CONSULT DATA MONITOR
- Turn ignition switch ON.
- Select "TAIL LAMP SIGNAL" of TOTAL ILLUM C/U data monitor item.
- While operating the lighting switch, check the monitor status.
Monitor item Condition Monitor status Lighting switch TAIL LAMP SIGNAL OFF Off 1ST On
Is the measurement value normal?
YES
Tail lamp signal circuit is normal.
NO
Refer to DIAGNOSIS PROCEDURE .