ADAS Control Unit Input/Output Signal Item
WARNING: This page is about a different car, the 2017 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
INPUT SIGNAL ITEM
| Transmit unit | Signal name | Description | ||
|---|---|---|---|---|
| TCM | CAN communication | Current gear position signal | Receives a current gear position. | |
| Shift position signal | Receives a select lever position. | |||
| ABS actuator and electric unit (control unit) | CAN communication | ABS malfunction signal | Receives a malfunction state of ABS. | |
| VDC malfunction signal | Receives a malfunction state of VDC. | |||
| Vehicle speed signal (ABS) | Receives wheel speeds of four wheels. | |||
| Combination meter | CAN communication | System selection signal | Receives a selection state of each item in "Driver Aids" selected with the integral switch. | |
| Side radar LH, RH | ITS communication | Vehicle detection signal | Receives vehicle detection condition of detection zone. | |
OUTPUT SIGNAL ITEM
| Reception unit | Signal name | Description | ||
|---|---|---|---|---|
| Combination meter | CAN communication | BSW indicator signal | Transmits a BSW indicator signal to turn ON the BSW indicator on the combination meter. | |
| Warning buzzer | Warning buzzer output signal | Activates warning buzzer. | ||
| Side radar LH, RH | ITS communication | Blind Spot Warning indicator signal | Transmits a Blind Spot Warning indicator signal to turn ON the Blind Spot Warning indicator. | |
| Blind Spot Warning indicator dimmer signal | Transmits a Blind Spot Warning indicator dimmer signal to dimmer Blind Spot Warning indicator. | |||
| Vehicle speed signal | Transmits a vehicle speed calculated by the ADAS control unit. | |||