DTC Detection Logic
WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B210B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC DESCRIPTION .
- If DTC B210B is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC DESCRIPTION .
| DTC No. | CONSULT Screen Terms (Trouble Diagnosis Content) | DTC Detection Condition | |
|---|---|---|---|
| B210B | START CONT RLY ON | Diagnosis condition | When the ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | IPDM E/R detects that the relay is stuck at ON position even if the following conditions are met for about 1 second:
|
||
| Diagnosis delay time | - | ||