DTC Detection Logic
WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B26F3 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC DESCRIPTION .
- If DTC B26F3 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC DESCRIPTION .
| DTC No. | CONSULT Screen Terms (Trouble Diagnosis Content) | DTC Detection Condition | |
|---|---|---|---|
| B26F3 | START CONT RLY ON | Diagnosis condition | When the ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | BCM requests IPDM E/R to turn starter control relay OFF, but BCM cannot receive starter control relay OFF state signal from IPDM E/R (CAN) | ||
| Diagnosis delay time | - | ||