Basic Inspection
WARNING: This page is about a different car, the 2016 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECTION START
Turn ignition switch OFF.
NOTE:Before starting operation check, open front windows.
GO TO STEP 2
- CHECK SECURITY INDICATOR LAMP
- Lock doors using keyfob or mechanical key.
- Check that security indicator lamp illuminates for 30 seconds.
Does the security indicator lamp illuminate?
YES
GO TO STEP 3
NO
Perform diagnosis and repair. Refer to SYSTEM DESCRIPTION .
- CHECK ALARM FUNCTION
- After 30 seconds, security indicator lamp will start to blink.
- Open any door before unlocking with keyfob or mechanical key.
Does the alarm function properly?
YES
GO TO STEP 4
NO
Check the following.
- The vehicle security system does not phase in alarm mode. Refer to SYMPTOM TABLE .
- Alarm (horn and headlamps) does not operate. Refer to SYMPTOM TABLE .
- CHECK ALARM CANCEL OPERATION
Unlock any door using keyfob or mechanical key.
Does the alarm (horn and headlamps) stop?
YES
Inspection End.
NO
Check door lock function. Refer to SYSTEM DESCRIPTION .