Additional Service When Replacing Control Unit: VCM: Description
Performing the following procedure can automatically activate recommunication of VCM and BCM, but only when the VCM is replaced with a new one*.
*: New one means a replacement VCM that has never been energized on-board.
(In this step, initialization procedure using CONSULT is not necessary)
NOTE:
- When the replaced VCM is not brand new, the initialization of BCM using CONSULT is necessary.
- If multiple keys are attached to the key holder, separate them before beginning work.
- Distinguish keys with unregistered key IDs from those with registered IDs.