| INSIDE BUZZER |
This test is able to check combination meter warning chime operation [Off/Take Out/Knob/Key]. |
| LCD |
B&P N |
This test is able to check combination meter traction motor start information. |
| B&P I |
| ID NG |
This test is able to check combination meter key ID warning information. |
| ROTAT |
This item is displayed, but is not used. |
| SFT P |
| INSRT |
| BATT |
This test is able to check combination meter Intelligent Key low battery warning information. |
| NO KY |
This item is displayed, but is not used. |
| OUTKEY |
This test is able to check combination meter take away warning information. |
| LK WN |
This test is able to check combination meter OFF position warning information. |
| Off |
- |
| BATTERY SAVER |
This test is able to check interior room lamp battery saver operation [Off/On]. |
| ENGINE SW ILLUMI |
This test is able to check power switch illumination operation [Off/On]. |
| PUSH SWITCH INDICATOR |
This test is able to check power switch ACC/ON indicator operation [Off/On]. |
| TRUNK/BACK DOOR |
This test is able to check back door opener actuator operation [Open]. |
| INT LAMP |
This test is able to check interior room lamp operation [Off/On]. |
| INDICATOR |
This test is able to check combination meter warning lamp operation [Off/KEY ON/KEY IND]. |
| FLASHER |
This test is able to check security hazard lamp operation [RH/LH/Off]. |
| OUTSIDE BUZZER |
This test is able to check Intelligent Key warning buzzer operation [On/Off]. |
| HORN |
This test is able to check horn operation [On]. |
| P RANGE |
This test is able to check park range operation [On/Off]. |