LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Maxima Platinum >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (2 Of 4) >> DTC/Circuit Diagnosis >> DTC P0172, P0175: Fuel Injection System Function >> DTC Description >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from A/F sensor 1. The ECM calculates the necessary compensation to correct the offset between the actual and the theoretical ratios.

In case the amount of the compensation value is extremely large (the actual mixture ratio is too rich), the ECM judges the condition as the fuel injection system malfunction and illuminates the MIL (2 trip detection logic).

Sensor Input signal to ECM ECM function Actuator
A/F sensor 1 Density of oxygen in exhaust gas
(Mixture ratio feedback signal)
Fuel injection control Fuel injector
  1. Fuel injection system does not operate properly.
  2. The amount of mixture ratio compensation is too large. (The mixture ratio is too rich.)
DTC CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0172 FUEL SYS-RICH-B1
(System too rich bank 1)
1 Diagnosis condition
  • Clear the mixture ratio self-learning value and start engine and let it idle
  • Start engine and drive the vehicle
Signal (terminal) -
Threshold Fuel injection system does not operate properly.
Diagnosis delay time -
2 Diagnosis condition
  • Clear the mixture ratio self-learning value and start engine and let it idle
  • Start engine and drive the vehicle
Signal (terminal) -
Threshold The amount of mixture ratio compensation is too large. (The mixture ratio is too rich.)
Diagnosis delay time -
P0175 FUEL SYS-RICH-B2
(System too rich bank 2)
1 Diagnosis condition
  • Clear the mixture ratio self-learning value and start engine and let it idle
  • Start engine and drive the vehicle
Signal (terminal) -
Threshold Fuel injection system does not operate properly.
Diagnosis delay time -
2 Diagnosis condition
  • Clear the mixture ratio self-learning value and start engine and let it idle
  • Start engine and drive the vehicle
Signal (terminal) -
Threshold The amount of mixture ratio compensation is too large. (The mixture ratio is too rich.)
Diagnosis delay time -