ADAS Control Unit Input/Output Signal Item
ADAS control unit receives signals via CAN communication. It also detects vehicle conditions that are necessary for Blind Spot Warning control.
INPUT SIGNAL ITEM
| Transmit unit | Signal name | Description | ||
|---|---|---|---|---|
| TCM | CAN communication | Shift position signal | Receives a selector lever position. | |
| ABS actuator and electric unit (control unit) | CAN communication | Vehicle speed signal (ABS) | Receives wheel speeds of four wheels. | |
| BCM | CAN communication | Turn indicator signal | Receives an operational state of the turn signal lamp and the hazard lamp. | |
| Dimmer signal | Receives ON/OFF state of dimmer signal. | |||
| Combination meter | CAN communication | System selection signal | Receives a selection state of each item in "Driver Aids" selected with the integral switch. | |
| Side radar LH, RH | ITS communication | Vehicle detection signal | Receives vehicle detection condition of detection zone. | |
OUTPUT SIGNAL ITEM
| Reception unit | Signal name | Description | ||
|---|---|---|---|---|
| Combination meter | CAN communication | BSW indicator signal | Transmits a BSW indicator signal to turn ON the BSW indicator on the combination meter. | |
| Buzzer output signal | Transmits a buzzer output signal to activate the buzzer. | |||
| Side radar LH, RH | ITS communication | Blind Spot Warning indicator signal | Transmits a Blind Spot Warning indicator signal to turn ON the Blind Spot Warning indicator. | |
| Blind Spot Warning indicator dimmer signal | Transmits a Blind Spot Warning indicator dimmer signal to dim Blind Spot Warning indicator. | |||
| Vehicle speed signal | Transmits a vehicle speed that is calculated by the ADAS control unit. | |||