LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Maxima SL >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (Chassis Control) (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> DTC C1BBA-00: Control Module >> DTC Description >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO STEP 2  .

  2. CHECK DTC DETECTION

    G-20 CONSULT

    1. Turn the ignition switch OFF to ON.
      CAUTION:

      Be sure to wait 10 seconds after turning ignition switch OFF or ON.

    2. Select "Self Diagnostic Result" mode of "CHASSIS CONTROL".

    Is DTC "C1BBA-00" detected?

    YES 

    Proceed to DIAGNOSIS PROCEDURE .

    NO-1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO-2 

    Confirmation after repair: Inspection End.

scientia non olet · About LEMON Manuals