DTC Detection Logic
There is a gap between angle of target and phase-control angle degree.
| DTC No. | Trouble diagnosis (Trouble diagnosis content) |
Detecting condition | Possible cause |
|---|---|---|---|
| P0018 | Crankshaft position B2 sensor A (Crankshaft position - camshaft position correlation bank 2 sensor A) |
Diagnosis condition | - |
| Signal (terminal) | Camshaft position sensor signal | ||
| Threshold | During the diagnosis of alignment of intake valve timing control, the angle difference between actual angle and target angle is 13 degrees or more. | ||
| Diagnosis delay time | 0.3 seconds or more |