Active Test

Test item	Description
OUTSIDE BUZZER	This test is able to check Intelligent Key warning buzzer operation On: Operate Off: Non-operation
INSIDE BUZZER	This test is able to check warning chime in combination meter operation Buzzer 1: Combination meter buzzer sounds (pipipi...) when CONSULT screen is touched Buzzer 2: Combination meter buzzer sounds (pipi-pipi-...) when CONSULT screen is touched Buzzer 3: Combination meter buzzer sounds (pipipipi-pipipipi-...) when CONSULT screen is touched Off: Non-operation
INDICATOR	This test is able to check warning lamp operation KEY ON: [Intelligent Key system malfunction] displays when CONSULT screen is touched KEY IND: "KEY" Warning lamp blinks when CONSULT screen is touched Off: Non-operation
FLASHER	This test is able to check security hazard lamp operation The hazard lamps are activated after "LH/RH/Off" on CONSULT screen is touched
HORN	This test is able to check horn operation On: Operates
IGN CONT2	This test is able to operate the blower relay in fuse block (J/B) On: Operates Off: Non-operation
ENGINE SW ILLUMI	This test is able to check push-ignition switch illumination operation Push-ignition switch illumination illuminates when "ON" on CONSULT screen is touched
ENGINE START REQUEST	This test is able to check BCM sends starter request signal to IPDM E/R via CAN communication MODE 1: IGN ON, START request OFF MODE 2: IGN OFF, START request ON MODE 3: IGN ON, START request ON Off: Non-operation
IGNITION RELAY	NOTE: This item is displayed, but cannot be used
STARTER CUT RELAY	This test is able to operate the starter control relay On: Operates Off: Non-operation
ENGINE START	NOTE: This item is displayed, but cannot be used
TRUNK/BACK DOOR	This test is able to check back door opener actuator open operation Back door opener actuator opens when "Open" on CONSULT screen is touched
RETRACTABLE MIRROR	NOTE: This item is displayed, but cannot be used
AUTO ACC 2	This test is able to check BCM sends power supply to audio unit or NAVI control unit On: Operate Off: Non-operation
AUTOMATIC BACK DOOR	NOTE: This item is displayed, but cannot be used
AUTO ACC 1	This test is able to check BCM sends power supply to ACC relay MODE 1: ACC relay ON, IGN relay OFF MODE 2: ACC relay OFF, IGN relay ON MODE 3: ACC relay ON, IGN relay ON Off: ACC relay and IGN relay OFF
TRUNK/LUGGAGE LAMP TEST	This test is able to check trunk/luggage room lamp operation On: Operates Off: Non-operation
REVERSE LAMP TEST	NOTE: This item is displayed, but cannot be used