Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor Item | Condition |
|---|---|
| CONFRM ID ALL | Indicates [Yet] at all time.Switches to [Done] when a registered key is inserted into ignition key cylinder. |
| CONFRM ID4 | |
| CONFRM ID3 | |
| CONFRM ID2 | |
| CONFRM ID1 | |
| NOT REGISTERED | Indicates [ID OK] when key ID that is registered is received or is not yet received. Indicates [ID NG] when key ID that is not registered is received. |
| TP 4 | Indicates the number of IDs that are registered. |
| TP 3 | |
| TP 2 | |
| TP 1 | |
| CLUTCH SW * 1 |
NOTE:
This item is displayed, but cannot be monitored |
| BRAKE SW 1 | Indicates [On/Off] * 2 condition of stop lamp switch power supply |
| BRAKE SW 2 | Indicates [On/Off] condition of stop lamp switch |
| START CLUTCH SW |
NOTE:
This item is displayed, but cannot be monitored |
| DOOR STAT-DR | Indicates [LOCK/READY/UNLK] condition of driver door status |
| DOOR STAT-AS | Indicates [LOCK/READY/UNLK] condition of passenger door status |
| DOOR STAT-RR | Indicates [LOCK/READY/UNLK] condition of rear door RH status |
| DOOR STAT-RL | Indicates [LOCK/READY/UNLK] condition of rear door LH status |
| BK DOOR STATE |
NOTE:
This item is displayed, but cannot be monitored |
| STOP/START SW | Indicates [On/Off] condition of stop/start off switch |
| RKE-LOCK | Indicates [On/Off] condition of LOCK signal from keyfob |
| RKE-UNLOCK | Indicates [On/Off] condition of UNLOCK signal from keyfob |
| RKE-TR/BD |
NOTE:
This item is displayed, but cannot be monitored |
| RKE-PANIC |
NOTE:
This item is displayed, but cannot be monitored |
| RKE-MODE CHG | Indicates [On/Off] condition of MODE CHANGE signal from keyfob |
| KEY SW |
NOTE:
This item is displayed, but cannot be monitored |
| IGN SW |
NOTE:
This item is displayed, but cannot be monitored |
| START SW |
NOTE:
This item is displayed, but cannot be monitored |
* 1 : It is displayed but does not operate on CVT models.
* 2 : OFF is displayed when brake pedal is depressed while brake switch power supply is OFF.