| P0340 |
Camshaft position sensor (PHASE) (bank 1) circuit |
- The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
- The cylinder No. signal is not sent to ECM during engine running.
- The cylinder No. signal is not in the normal pattern during engine running.
|
- Harness or connectors
[CMP sensor (PHASE) circuit is open or shorted.]
(APP sensor 2 circuit is shorted.)
(Battery current sensor circuit is shorted.)
(EOP sensor circuit is shorted.)
(Refrigerant pressure sensor circuit is shorted.)
- Camshaft position sensor (PHASE)
- Camshaft (INT)
- Starter motor (Refer to SYSTEM DESCRIPTION
.)
- Starting system circuit (Refer to SYSTEM DESCRIPTION
.)
- Dead (Weak) battery
- Accelerator pedal position sensor
- Battery current sensor
- Engine oil pressure sensor
- Refrigerant pressure sensor
|