Physical Values
| Terminal (Wire color) |
Description | Condition | Standard | Reference value (Approx.) |
|||
|---|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||||
| 2 (LG) |
3 (Y) |
Sound signal front speaker LH | Output | Ignition switch ON | Sound output | Waveform according to sound signal is input. | |
| 4 (V) |
5 (L) |
Sound signal slide door speaker LH | Output | Ignition switch ON | Sound output | Waveform according to sound signal is input. | |
| 6 (BE) |
15 (W) |
Steering switch signal A | Input | Ignition switch ON | Keep pressing SOURCE switch. | 0 - 3.3 V | 0 V |
| Keep pressing SEEK UP switch. | 0.7 V | ||||||
| Keep pressing SEEK DOWN switch. | 1.3 V | ||||||
| Keep pressing |
2.0 V | ||||||
| Except for above. | 3.3 V | ||||||
| 7 (O) |
20 (B) |
ACC power supply | Input | Ignition switch ACC | - | 9.0 - 16.0 V | Battery voltage |
| 9 (BE) |
20 (B) |
Dimmer signal | Input | Ignition switch ON | Either of the following conditions
|
3.0 V or less | 0 V |
| Lighting switch is 1st or 2nd, and the area around the vehicle is dark (block the light from the optical sensor) | 7.0 - 16.0 V | 12.0 V | |||||
| 11 (L) |
12 (B) |
Sound signal front speaker RH | Output | Ignition switch ON | Sound output | Outputs waveform synchronized with sound. | |
| 13 (BR) |
14 (SB) |
Sound signal slide door speaker RH | Output | Ignition switch ON | Sound output | Outputs waveform synchronized with sound. | |
| 16 (P) |
15 (W) |
Steering switch signal B | Input | Ignition switch ON | Keep pressing VOL DOWN switch. | 0 - 3.3 V | 0 V |
| Keep pressing VOL UP switch. | 0.7 V | ||||||
| Keep pressing |
1.3 V | ||||||
| Except for above. | 3.3 V | ||||||
| 19 (SB) |
20 (B) |
Battery power supply | Input | Ignition switch OFF | - | 9.0 - 16.0 V | Battery voltage |
| 36 (O) |
37 (SB) |
Signal VCC | Output | Ignition switch ACC | - | 8.0 - 9.5 V | 8.8 V |
| 38 (G) |
20 (B) |
Horizontal synchronizing (HP) signal | Input | Ignition switch ON | - | Waveform of 1.0 V - 5.5 V is input. | |
| 39 (W) |
20 (B) |
Communication signal (DISP→CONT) |
Input | Ignition switch ON | When adjusting display brightness. | Waveform of 0.5 V or less - 3.5 V or more is input. | |
| 40 (B) |
20 (B) |
RGB area (YS) signal | Output | Ignition switch ON | At RGB image is displayed. | 5.5 V or less | 5.0 V |
| At AUX image is displayed. | Waveform of 0.8 V - 5.5 V is Output. | ||||||
| 41 | - | Shield | - | - | - | - | - |
| 42 (W) |
20 (B) |
RGB synchronizing signal | Output | Ignition switch ON | - | Waveform of 0.8 V - 5.5 V is Output. | |
| 43 (R) |
20 (B) |
RGB image signal (R: red) | Output | Ignition switch ON | Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen. | Outputs waveform synchronized with RGB image. | |
| 44 (W) |
20 (B) |
RGB image signal (G: green) | Output | Ignition switch ON | Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen. | Outputs waveform synchronized with RGB image. | |
| 45 (B) |
20 (B) |
RGB image signal (B: blue) | Output | Ignition switch ON | Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen. | Outputs waveform synchronized with RGB image. | |
| 47 (B) |
46 (W) |
Composite image signal (for front display unit) | Output | Ignition switch ON | When DVD or AUX image is displayed on front display unit. | Outputs waveform synchronized with composite image. | |
| 48 (BR) |
49 (P) |
Inverter VCC | Output | Ignition switch ACC | - | 8.0 - 9.5 V | 8.8 V |
| 50 (R) |
20 (B) |
Vertical synchronizing (VP) signal | Input | Ignition switch ON | - | Waveform of 1.0 V - 5.5 V is input. | |
| 51 (B) |
20 (B) |
Communication signal (CONT→DISP) |
Output | Ignition switch ON | When adjusting display brightness. | Waveform of 0.5 V or less - 3.5 V or more is output. | |
| 52 | - | Shield | - | - | - | - | - |
| 57 | - | Shield | - | - | - | - | - |
| 58 | - | Shield | - | - | - | - | - |
| 61 (BR) |
69 (Y) |
AUX image signal | Output | Ignition switch ON | When AUX image is displayed on front or rear display unit. | Outputs waveform synchronized with AUX image. | |
| 62 (Y) |
20 (B) |
Camera image signal | input | Ignition switch ON | When camera image is displayed. | Waveform according to camera image is input. | |
| 65 | - | Shield | - | - | - | - | - |
| 67 (W) |
66 (B) |
Composite image signal (for rear display unit) | Output | Ignition switch ON | When DVD or AUX image is displayed on rear display unit | Outputs waveform synchronized with composite image. | |
| 70 | - | Shield | - | - | - | - | - |
| 71 | - | Shield | - | - | - | - | - |
| 73 (G) |
72 (R) |
Camera power supply | Output | Ignition switch ON | When camera image is displayed. | 5.9 - 6.5 V | 6.2 V |
| 76 (LG) |
- | AV communication signal (L) | Input/Output | - | - | - | - |
| 77 (V) |
- | AV communication signal (H) | Input/Output | - | - | - | - |
| 78 (LG) |
- | AV communication signal (L) | Input/Output | - | - | - | - |
| 79 (SB) |
- | AV communication signal (H) | Input/Output | - | - | - | - |
| 80 (P) |
- | CAN-L | Input/Output | - | - | - | - |
| 81 (L) |
- | CAN-H | Input/Output | - | - | - | - |
| 87 (R) |
88 (W) |
Sound signal (TEL voice, voice guidance) |
Output | Ignition switch ON | During voice guide output with the |
Outputs waveform synchronized with sound. | |
| 90 (BR) |
91 (Y) |
Headphone sound signal RH | Output | Ignition switch ON | Headphone sound output. | Outputs waveform synchronized with sound. | |
| 92 (P) |
20 (B) |
Vehicle speed signal (8 - pulse) | Input | Ignition switch ON | When vehicle speed is approx. 40 km/h (25 MPH) | Waveform according to vehicle speed is input. |
NOTE:
The maximum voltage varies depending on the specification (destination unit). |
| 93 (R) |
20 (B) |
Parking brake signal | Input | Ignition switch ON | Parking brake is applied. | 1.5 V or less | 0 V |
| Parking brake is released. | 3.5 V or more | 4.5 V | |||||
| 94 (W) |
20 (B) |
Reverse signal | Input | Ignition switch ON | Selector lever is in "R" position. | 7.0 - 16.0 V | 12.0 V |
| Selector lever is in other than "R" position. | - | 0 V | |||||
| 95 (G) |
20 (B) |
Ignition signal | Input | Ignition switch ON | - | 9.0 - 16.0 V | Battery voltage |
| 96 (W) |
82 (R) |
Disk eject signal | Input | Ignition switch ON | Keep pressing disk eject switch. | - | 0 V |
| Except for above. | - | 3.3 V | |||||
| 103 (B) |
102 (W) |
AUX sound signal LH | Input | Ignition switch ON | When AUX mode is selected on front or rear display unit. | Waveform according to sound is input. | |
| 104 (R) |
102 (W) |
AUX sound signal RH | Input | Ignition switch ON | When AUX mode is selected on front or rear display unit. | Waveform according to sound is input. | |
| 105 (GR) |
- | Shield | - | - | - | - | - |
| 106 (P) |
107 (L) |
Headphone sound signal LH | Output | Ignition switch ON | Headphone sound output. | Outputs waveform synchronized with sound. | |
| 120 (R) |
124 (B) |
Satellite radio sound signal LH | Input | Ignition switch ON | When satellite radio mode is selected. | Outputs waveform synchronized with sound. | |
| 121 (W) |
125 (G) |
Satellite radio sound signal RH | Output | Ignition switch ON | When satellite radio mode is selected. | Outputs waveform synchronized with sound. | |
| 122 (R/W) |
20 (B) |
Communication signal (CONT→SAT) |
Output | Ignition switch ON | When satellite radio mode is selected. | Waveform of 1.5 - 6.0 V is input. | |
| 126 | - | Shield | - | - | - | - | - |
| 127 | - | Shield | - | - | - | - | - |
| 129 (R/L) |
20 (B) |
Request signal (SAT→CONT) |
Input | Ignition switch ON | When satellite radio mode is selected. | Waveform of 1.1 V or less - 7.181 V or more is Input. | |
| 130 (B) |
20 (B) |
Communication signal (SAT→CONT) |
Input | Ignition switch ON | When satellite radio mode is selected. | Waveform of 1.1 V or less - 7.181 V or more is Input. | |
| 132 (G) |
- | USB ground | - | - | - | - | - |
| 133 (W) |
- | USB D - signal | - | - | - | - | - |
| 134 (R) |
- | V BUS signal | - | - | - | 4.75 - 5.25 V | - |
| 135 (B) |
- | USB D+ signal | - | - | - | - | - |
| 136 | - | Shield | - | - | - | - | - |
| 150 | 20 (B) |
Antenna amp. ON signal | Input | Ignition switch ACC | - | 7.0 - 16.0 V | 12.0 V |
| 151 | - | AM - FM main | Input | - | - | - | - |
| 152 | - | FM sub | Input | - | - | - | - |