LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Rogue SL, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (Driver Assistance System) (Introduction) (Except Hybrid) >> System Description >> Diagnosis System (Chassis Control Module) >> Consult Function >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Item
[Unit]
Description
IGN VOLT [V] Displays the ignition power supply voltage.
CONTROL MODULE MALF [Off / On] Displays chassis control module malfunction.
CAN DIAG STATUS [Off / On] Displays CAN network diagnosis status.
VEHICLE SPEED [km/m] Displays the vehicle speed.
FR WHEEL SPEED [RPM] Displays the rotational speed of front RH tire.
FL WHEEL SPEED [RPM] Displays the rotational speed of front LH tire.
RR WHEEL SPEED [RPM] Displays the rotational speed of rear RH tire.
RL WHEEL SPEED [RPM] Displays the rotational speed of rear LH tire.
STEERING ANG SENSOR [deg] Displays the steering angle from the steering angle sensor.
DECEL G SENSOR [G] Displays the decel G.
SIDE G SENSOR [G] Displays the side G.
YAW RATE SENSOR [deg/s] Displays the yaw rate.
ACCELE PEDAL POSITION [%] Displays the accelerator pedal position.
THROTTLE CONTROL [NORMAL / INCORR / PREV / INPOSSI] Displays the electric throttle status.
BRAKE SWITCH 2 [Off / On] Displays brake switch operating status (Off: close / On: open).
BRAKE SWITCH 1 [Off / On] Displays brake switch operating status (Off: open / On: close).
STOP LAMP SW [INACT / ACT] Displays the stop lamp switch status.
PRESS SENSOR [bar] Displays the brake fluid pressure.
ABS [NORMAL / ABNOR] Displays ABS function status.
ABS MALF [NORMAL / ABNOR] Displays ABS function status.
EBD [NORMAL / ABNOR] Displays EBD function status.
TCS [NORMAL / ABNOR] Displays TCS function status.
TCS MALF [NORMAL / ABNOR] Displays TCS function status.
VDC [NORMAL / ABNOR] Displays VDC function status.
VDC MALF [NORMAL / ABNOR] Displays VDC function status.
VDC OFF SWITCH [Off / On] Displays VDC OFF switch status.
DRV TRQ CTRL MODE [INITIAL / NORMAL / STOP 1 / STOP 2 / LIMIT 1 / PROHIBI] Displays the status of correction to slightly increase/decrease the drive torque.
DRV TRQ CTRL PERMIS 1 [NO PER / PERMIS] Displays the permission status (basic requirement) of correction to slightly increase/decrease drive torque.
DRV TRQ CTRL PERMIS 2 [NO PER / PERMIS] Displays the permission status (system requirement) of correction to slightly increase/decrease drive torque.
DRV TRQ CTRL STOP [REQ / NO REQ] Displays the stop request status of correction to slightly increase/decrease drive torque.
DRV TRQ CTRL PROHIBIT [REQ / NO REQ] Displays the prohibition request status of correction to slightly increase/decrease drive torque.
AEB [Off / On] Displays the Active Engine Brake (corner) function operating status
ATC 1 [Off / On] Displays active trace control function operating status.
ATC 2 [Off / On] Displays active trace control function operating status.
ATC 3 [Off / On] Displays active trace control function operating status.
ATC 4 [Off / On] Displays active trace control function operating status.
ATC 5 [Off / On] Displays active trace control function operating status.
BRAKE HOLD [INACT / ACT / RELEA] Displays the status of Hill Start Assist function.
FL TIRE DISP [DEF / 1] Displays tire status.
FR TIRE DISP [DEF / 1] Displays tire status.
RL TIRE DISP [DEF / 1] Displays tire status.
RR TIRE DISP [DEF / 1] Displays tire status.
VEHICLE DISP [Off / On] Displays Active Ride Control (brake) activation status.
INTERRUPT DISP [NOREQ / HOLD1 / HOLD2 / HDC] Displays the interruption status.
TURN DISP [NSTEER / LEFT / RIGHT] Displays the turn status.
BRAKE HOLD DISP [INACT / ACT / RELEA] Displays the brake hold status.
ATC DISP [Off / On] Displays Active Trace Control status.
ARC BRAKE DISP [Off / On] Displays the status of Active Ride Control (brake).
HDC DISP [Off / On] Displays the Hill Descent Control.
AEB CVT PERMIT [Off / On] Displays the CVT authorized state for Active Engine Brake.
AEB STATUS [Off / On] Displays the setting status of Active Engine Brake function.
AEB COMMAND 1 [0.0000] Displays the relative command value of Active Engine Brake.
AEB SLIP RATE [%] Displays slip ratio of Active Engine Brake.
ATC SETTING [Off / On] Displays the setting status of Active Trace Control function by steering switch.
AEB SETTING [Off / On] Displays the setting status of Active Engine Brake function by steering switch.
ARC BRAKE [Off / On] Displays the Active Ride Control function status.